THE HVAC-CHIP INSTALLED IN YOUR HVAC AIR HANDLER UNIT, ROOF TOP UNIT, OR IN YOUR BUILDING THERMOSTAT CAN:
- Reduce your utility bill up to 14.8% in the summer and 11.8% in the winter.
- Reduce the number of on and off cycles thereby increasing the lifetime of your HVAC unit.
CLICK HERE for detailed installation instructions in PDF format
HOW IT WORKS:
- The HVAC-CHIP records how long the compressor or heater has been powered on and how long it has been powered off or depends on any one power on or power off duration over many cycles and predicts the fan extension. It does not depend on current compressor or heater cycle.
- It extends the HVAC blower for a predicted additional run time after the compressor or heater has shut down.
- Energy savings is achieved by blowing the residual cold or hot air back into the building intelligently.
CWS HVAC Chip 0006X / 0006D Disclaimer:
HVAC Chip 0006X / 0006 Rev D must be used in accordance with manufacturer specifications and application guidelines. The 0006X and 0006 rev D makes the gas furnace blower fan runs at variable speed for maximum energy savings.
WARNING: This product can expose you to chemicals, which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to P65 Warnings website .